Water and copolymer binder-based
plaster primer for concrete surfaces,
wall and ceilings that increases adhesion
of cement and gypsum based additives on surfaces.
Introduction: Water and copolymer binder-based plaster primer for concrete surfaces, wall and ceilings
that increases adhesion of cement and gypsum based additives on surfaces.
Characteristics: Easily applied primer that quickly prevents water loss of cement and particularly
gypsum based plasters enhances adhesion of cement and plaster gypsum used in interior, walls and
ceilings on concrete. It increases efficiency of surfaces. It is odorless and ecologically clean.
Instructions for use: The surface should be completely cleaned from any oil, rust and paraffin remains
and no crumb should be left. Thinned primer is mixed well and applied on ready-made surface.
Temperature on the surface to be primed should be between 5-35°C. It should not be applied on
surfaces with high humidity rate (bath, pool and etc.). Primer should be uninterruptedly mixed while
using. It is applied with brush and roller. Pankontakt is mixed with 1/3 water untill homogenous solution
Consumption: On a single coat approximately 4-7 m2/kgs.
Dry-out: at 20°C, touch dry: 1-2 hours, until solid film: 24 hours.
Storage: The primer should be stored in closed containers between 5-35°C temperatures away from
direct sunlight in a non-humid place. Storage period: 2 years.
Safety measures: S2: Keep out of the reach of children. S24/25: Avoid eye and skin contact. S26: After
eye contact wash immediately with plenty of water. S29: Do not dispose to sewerage. S46: Immediately
go to the doctor when ingested and submit the package or label. S51: It should be used in well-aired